AnhuiHeliElectric Co., Ltd.

:::Product Center:::

DLD2 Series Electromagnetic Singledisc Clutches

1、Applications
　　DLD2 Clutches are Singledisc Clutches for dry operation,without slipring,the coil not ratating.High transmitting torque,quick response and no drag torque.
　　They are widely used in packing machines,printing machines,textile machines etc...,to realize the driven and driving shaft while the latter is running.

2、Main Technical Data

	DLD2-05	DLD2-10	DLD2-20	DLD2-40	DLD2-80	DLD2-160	DLD2-250	DLD2-320	DLD2-500	DLD2-1000
Rated TORQUE (N.m)	5	10	20	40	80	160	250	320	500	1000
Rated PowerP20℃ (W)	12	15	20	25	35	45	55	60	80	100
Rated Voltage (V DC)	24	24	24	24	24	24	24	24	24	24
Engaging Time(≤ms)	55	75	120	140	230	250	303	380	450	505
Disanganing time (≤ms)	15	25	35	45	60	90	170	200	260	330
Allowable Max Spead(rpm)	3600	3600	3000	3000	2500	2500	2500	2000	2000	1500

3、Overall and Installation Dimensions

	D1	D2	D3	D4	D5	D6	D7	D8	D9	M
DLD2-05	80	72	35	67	46	38	12	4×φ5	3×3.1	M4
DLD2-10	100	90	42	85	60	45	15	4×φ6	3×4.1	M5
DLD2-20	125	112	52	106	76	55	20	4×φ7	3×5.1	M5
DLD2-40	150	137	62	133	95	64	25	4×φ7	3×6.1	M6
DLD2-80	190	175	80	169	120	75	30	4×φ9.5	3×8.1	M8
DLD2-160	230	215	100	213	158	100	45	4×φ9.5	3×10.2	M8
DLD2-250	280	260	120	253	185.5	110	50	4×φ11	3×10.2	M10
DLD2-320	290	270	120	267	210	118	45	4×φ11	3×12.2	M10
DLD2-500	310	290	130	285	248	125	50	4×φ11	3×12.2	M10
DLD2-1000	440	420	200	424	315			4×φ12.5	3×16.2	M12

	d	L	L1	L2	L3	L4	L5	L6	L7	b	b1	h	δ
DLD2-05	15	24	4	19	27.5	20	22	15	14	5	4	17.3	0.3
DLD2-10	15	26	5	25	35	25	24	20	15	5	5	17.3	0.3
DLD2-20	20	30	6	31	41	30	27	25	20	6	6	22.3	0.4
DLD2-40	25	34	6.5	36.5	52.5	40	30	30	30	8	8	28.3	0.4
DLD2-80	30	38	8.5	47	65.5	50	34	38	35	8	8	33.3	0.5
DLD2-160	45	44	11	53	80	60	40	42	45	14	14	48.8	0.5
DLD2-250	55	50	12	62	81.5	65	45	50	50	16	16	59.3	0.6
DLD2-320	55	51	12.5	67.5	92.5	70	47	55	50	16	16	59.3	0.6
DLD2-500	60	55	135	73.5	99.5	75	50	60	55	18	18	64.4	0.8
DLD2-1000	70	66	19	95			56	76		20		74.9	0.8

4、 Installation

Warning
Friction dise and armature surface should be kept clean and free of grease.
The coaxial degree should not exceed 0.1mm.
Fit h7 is recommended so that the cluth can be fitted easily and without demange on to the shaft.
Not allowde to move on axial direction.
Airgap should be kept in "δ" .

Examples for Installation

:::Product:::